Qingdao Top Run International Trade Co., Ltd.
Tel
+86 15275228746
WhatsApp/WeChat
8615275228746
Knowledge
Popular Blog Posts
Recommended
Off-Highway Rigid Mining Trucks Parts
supply SPARE PARTS FOR Sany Dump Truck Off-Highway Rigid Mining Trucks SRT33, SRT45, SRT55, SRT55C, SRT55D, SRT95, SRT95C, SKT40S, SKT90S, SKT105S, SKT130S, SKT160S Articulated Dump Trucks SAT40C On-Road Dump Trucks SYZ316C-8S, SYZ320C-8S, SYZ320C-8W, SYZ324C-8Y, SYZ331-8S, SYZ425C-8S,...
AIR COMPRESSOR 803588834
AIR COMPRESSOR 803588834 for XCMG WHEEL LOADER LW 700HV
60320054 Generator
SANY excavator parts generator 60320054
Gear Pump/hydraulic Pump 803069443
XCMG crane gear pumphydraulic pump 803069443
Send Message
Crane accessories also need to undergo security checks
Nov 19, 2024
View: 9
Crane accessories are the common names for crane components. What are the common crane accessories we see, and how can we conduct safety checks on lifting components? Let's take everyone to learn about it!
Drum: Whether there are fatigue cracks and fractures on the drum body and edges, whether the wear of the rope groove and drum wall exceeds the standard, whether the height of the drum edge matches the number of winding layers of the steel wire rope, and whether the working conditions of the rope guide and guide meet the requirements;
Reducer: whether there are abnormal sounds such as severe metal friction, vibration, and shell radiation during the operation of the reducer; Whether the shaft end is well sealed, and whether the fixing bolts are loose or defective; The selection of gearbox lubricating oil, oil level height, operation of vertical gearbox lubricating oil pump, and lubrication of open gear transmission meet the requirements.
Couplings: Check for defects, loose connections, and impact during operation of the coupling parts. Check for excessive wear on the coupling, pin shaft, pin shaft hole, and buffer rubber ring. Also, check if the coupling is concentric with the two connecting components.
Wheel: Check whether there are fatigue cracks on the tread and axle of the wheel, and whether the wear on the tread and axle exceeds the standard. Is there any rail gnawing phenomenon during operation. What is the cause of rail gnawing
Pulley: Does the pulley have an anti slip groove device; Whether there are cracks, broken edges, excessive wear and tear on the pulley groove and rim, and whether the pulley rotates flexibly
Wire rope: Check whether the specifications and models of the wire rope match the pulley drum according to the design requirements. Whether the steel wire rope fixing devices such as pressure plates, rope clamps, and wedges at the fixed end of the steel wire rope meet the requirements. Whether the wear, breakage, twisting, flattening, bending, strand breakage, corrosion, etc. of the steel wire rope exceed the standard.
These are all very important types of crane accessories. Before using the crane, we must conduct a safety check on these lifting accessories and not skip the security check due to inconvenience.