Maintenance content of crane wheel assembly

The crane wheel set is like the wheels of the car we drive, used to support weight and load. Due to long-term wear and tear and damage caused by improper use, we need to do a good job in repairing crane accessories. Below is a brief introduction to the maintenance content of the down wheel.
1) The axle holes of the wheelset need to be inspected regularly, and there are strict regulations on the defects and depth of the axle holes. If the specified amount is exceeded, new parts must be replaced.
2) If the radial wear of the wheel pulley groove exceeds 32% of the wall thickness, a new one needs to be replaced. If not exceeded, repairs should be made, and the distance between repairs should not exceed 0.5 millimeters
3) During the maintenance of the wheel and pulley, it is necessary to check for cracks, and the wear of the component journal should not exceed 40%, otherwise new components need to be replaced.
4) During maintenance, it is necessary to disassemble the walking wheel. After inspection and maintenance, it should be assembled in a timely manner. After assembly, they need to be tested.
The above is the introduction about the crane wheel assembly. In fact, the sales volume of crane accessories is also very high every year. We remind everyone not to neglect the replacement of equipment accessories, especially mechanical equipment, in order to save some money.