Replacement of Crane Brake Pads

Brake pads are a part of crane brakes and a commonly used accessory for crane parts. The replacement of crane brake pads is an important task. Its speed directly affects the safety performance of the crane.
Before replacing the brake pads, it is necessary to check the wear of the brake pads. The degree of wear of brake pads depends on the time and frequency of use. If the wear level of the brake pads reaches the specified standard, then the brake pads must be replaced.
When replacing brake pads, the correct tools and equipment must be used. The tools for replacing brake pads include a wrench, a brake pad remover, and a brake pad changer.
1. Use a wrench to secure the brake pad remover onto the brake pads, and then use a wrench to loosen the brake pad remover.
2. Use a disassembler to remove the brake pads, and then install new brake pads on the brake pads.
3. When installing new brake pads, it is necessary to ensure that they match the installation surface of the brake disc. If the installation surface of the brake pads and brake discs does not match, it will result in poor braking effect, thereby affecting the safety performance of the crane.
By following the above steps, the replacement of the brake pads for the crane can be completed. After replacing the brake pads, necessary adjustments and tests must be made to ensure the safety performance of the crane.